Drill Stem Testing Tools Tubing String Testing (TST) Valve

Model: 5" TST
Place of Origin: Shaanxi,China (Mainland)
Certification: API, ISO
Type: APR drill stem testing tools
Pressure: high pressure
Service: H2S + CO2
Application: oil well testing
Product mode: Halliburton type, all could change with Halliburton parts.
Condition: New
Standard: NACE MR0175
Maximum Pressure Rating: 15000psi


basketAdd to Basket  Edit

Share |

Product Description

Payment & Shipping Terms Supply Capacity
Unit Price:10.0 USDProduction Capacity:100 set/month
Trade Term:FOB,CFR,CIF,DDP,DAP,CIP,CPT,EXW,DDUPacking:seaworthy packing
Payment Terms:L/C, T/TDelivery Date:30days after the down...
Min. Order:1 Piece/Pieces
Means of Transport:EXPRESS, Ocean, Air, Land

Drill Stem Testing Tools Tubing String Testing (TST) Valve 

Product Introduction

The tubing string testing (TST) valve is a full-opening valve used to pressure-test the workstring while running in the hole. The valve is operated after it is stung into a permanent packer or after a retrievable packer is set. The TST valve requires a differential pressure between the annulus and the tubing to shear. The TST valve can also be used for pipe flexing if it is run below an annulus pressure-responsive circulating valve.

The TST valve consists of:

• flapper valve and spring

• shear pin section

• locking dogs

Features and Benefits

• Flapper valve requires only 4 psi to open.

• Testing string can be pressure-tested as many times as 

required as it is run in the hole.

• Valve shear rating can be pre-determined at 500 psi 


• Valve can also be used for pipe flexing


When the TST flapper valve opens, it allows the workstring to fill up. The shear pins hold the mandrel in place. The workstring can be pressure-tested as many times as required as it is run in the hole. While the workstring is stationary, a spring keeps the flapper valve closed. After the workstring pressure test is complete, the tool is sheared when annulus pressure is applied to the predetermined shear pin rating. (The shear rating can be adjusted in 500 psi increments to shear from 500 to 6,000 psi differential.) When the pins shear, the mandrel moves up and pushes the flapper open, allowing the locking dogs to engage. The tool is then fully open. The tool works on differential pressure between annulus and tubing. Failure to shear initially on application of annulus pressure is not critical. The process of drawing the well down also creates a pressure differential that helps the tool shear. When used for pipe flexing, the TST valve is run below an annulus pressure-responsive circulating valve, such as the RD circulating valve. The string is pressured up against the flapper valve as many times as required. The circulating valve is sheared after flexing operations are complete, and the workstring is pulled out dry.

About Us

Xi'an Kingwell Oilfield Machinery Co.,Ltd is a professional supplier for oilfield products according to the API standard.

Our products have exported to USA, Canada, Egypt, India and UEA, etc with 40 FCL containers per month. Now, with high quality and short supply and good service, our products have got good reputation home and abroad .

Here we got some prise as follows.


Kingwell is a CNPC & SINOPEC & BV certified company, having all the Quality Systems in place for design, planning, manufacturing and quality monitoring & traceability to ensure our products match the highest quality standards.

We test our products strictly according to the NACE MR 0175-2002 Standard and our quality assurance period is 12 months.

Certificates endorsed by DNV/BV/ABS and Documents we can supply with the shipments:

1. Pressure Test Certificate with Graph and time recorded.

2. Function Test   

3. Rubber Products NACE Compliance   

4. Material Mill Certificate and treatment characteristics

5. H2S Compliance   

6. Service Manual

7. Parts Manual

8. Testing Procedures.

9. Open up type tool drawing for dressing purpose– if any.

Design & Development

Kingwell has an ongoing relationship with Xi'an Petroleum University and built up long term cooperation with China Aerospace Group for more than 10 years. Design Department is familiar with CAD and Pro-E facilities and has on rolls qualified & experienced engineers. Now, they are engaged in development of new products as required in the market place. Kingwell' products are validated in-house in a Test Well, a Sub-surface Type Test Facility with simulated well conditions up to 15000 psi Differential pressure , 400°F and Max 450°F.

Inspection and Test Facilities

We own the world-class facilities with professional laboratory technicians. The main facilities are Surface Testing (Hydraulic Testing Unit), high temperature heat treatment furnaces, API Gages (Master & Working), Profile Projector, tensile testing machine, pressure sensor and data acquisition system, Universal Testing Machine, Hardness Tester, Nitrogen Pump, Function Test Pump, Ultrasonic Thickness Tester etc. All the goods must be tested by several processes and must be qualified when packed.

Product delivery

Payment:TT/LC:30% advance payment.70%before shipment

Warranty: Warranty period is 1 year after installation.

Origin: China

Minimum order: 1 set

Packaging: wood case or steel carton

Delivery Date: within 1-2 month(s) after receiving prepayment

Logo: KW, we can produce according to customer requirements.

Technical Documents: We can provide technical documents according to your requirements.

Additional service: Customers are served to test our products in our factory upon request.

The followings are some pictures about product packaging


Kindly let me know if you have any interest or enquiry about our products. You are also always welcomed to come to our factory for a visit at your convenient time.

We will offer you a good price and show you our best service.

Category: Tester Valve

Related Category: Gauge Carrier  Slip Joint  OMNI Valve  LRR-N Valve  Safety Valve