Mud Pump Piston with Rubbers
KINGWELL produces a
series of API7K-compliant mud pumps ranging from F-500 to F-2200. F-2200 is a
tri-cylinder, single-action, heavy-duty, high-pressure drilling pump with a
maximum power of 2,200HP, maximum working pressure of 52MPa, and maximum
displacement of 77.65L/s.
F-1300L and F-1600 mud pumps have a Max Pump pressure of 34.5MPa (5000Psi) and a
displacement of 46.5L/S with a liner of Φ180mm. These two models are the first
choice for medium and deep drilling rig as an assorted
F-1600,F-2200 mud pumps with high-power and high-pressure are
developed to meet drilling requirements of offshore deep-water, terrestrial and
horizontal wells, especially in desert areas.
premium pistons are fully interchangeable with other API standard designed
pistons and deliver maximum performance in almost all drilling conditions. High
tensile strength, resistance to chemicals, hydrocarbons, and abrasion, long
and full interchangeability with other API designed pistons make our premium
piston a sound value.
Rubber Pistons Premium Bonded Urethane Pistons
one piece bonded constructed piston has no joints to leak. Eliminates abrasive
fluids between piston and liner. The fluid expanded lip is not damaged by high
pressure and fast pump strokes. This Fail-Safe piston seals off to greater
diameter as liner wears
running in pumps using exotic muds and highest drilling pressures! Bonded
construction - no joints, no leakage. Longer piston and liner life. This piston
will run in higher-pressure, fast stroking pumps, and is resistant to oil base
muds and other additives currently being used. This Premium Piston has been in
service for years, providing unmatched performance under extreme drilling
conditions. This one piece bonded unit provides the same series of advantages.,
being imprevious to oil and other chemicals
of Piston & Parts
also offers a full line of piston replacements including Piston Hubs, Plates,
Snap rings and Replacement Rubbers.
hub is formed from high grade steel.
piston rubber is made from specially formulated compounds which are resistant to
the effects of heat, oil and water. The multi-ply fabric reinforced backings
used in the production of the piston rubbers provide positive, wear resistant